Improvements for a Fully Consistent Description of the New Semi-Empirical Vapor Density Model for Pure Compounds - IMT Mines Albi-Carmaux Accéder directement au contenu
Article Dans Une Revue Fluid Phase Equilibria Année : 2022

Improvements for a Fully Consistent Description of the New Semi-Empirical Vapor Density Model for Pure Compounds

Résumé

In chemical engineering, surrogate functions are commonly used in modeling thermodynamic properties of pure compounds because they are often more accurate than equations of state. In 2020, we presented a semi-empirical model describing the vapor density from the reduced triple point temperature to about a reduced temperature of 0.97 with only one temperature-dependent term. However, in many cases the temperature range up to critical temperature is necessary. Therefore, the existing semi-empirical model was extended by another temperature-dependent term. This allows the vapor density to be described from the triple point temperature up to the critical temperature. This model has the additional advantage that it can predict the vapor pressure data from vapor density data. Therefore, this model can also be used for thermodynamic consistency testing. This is not possible with conventionally known surrogate models for describing vapor density. The model was successfully tested using fluoromethane (R41) and difluoromethane (R32) as examples.
Fichier principal
Vignette du fichier
Kud & Coquelet. Manuscript&SuppMat 2022.01.07 for FPE.pdf (3.76 Mo) Télécharger le fichier
Origine : Fichiers produits par l'(les) auteur(s)

Dates et versions

hal-03514283 , version 1 (28-01-2022)

Identifiants

Citer

Alexander Kud, Christophe Coquelet. Improvements for a Fully Consistent Description of the New Semi-Empirical Vapor Density Model for Pure Compounds. Fluid Phase Equilibria, 2022, 556, pp.113374. ⟨10.1016/j.fluid.2021.113374⟩. ⟨hal-03514283⟩
115 Consultations
36 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More