Modelling powder compaction with consideration of a deep grooved punch - IMT Mines Albi-Carmaux Accéder directement au contenu
Article Dans Une Revue Powder Technology Année : 2022

Modelling powder compaction with consideration of a deep grooved punch

Résumé

In this work a modelling approach for predicting density distribution in the vicinity of two facing grooves on a parallelepiped compact surface, is developed and results are validated using X-ray tomography. An experimental hybrid procedure is proposed to calibrate Drucker-Prager Cap model material parameters which are numerically validated and considered for FEM compaction simulation of grooved specimen using Arbitrary Lagrangian Eulerian method (ALE). Results of the predicted density show high values under the groove and low values on its flanks and shoulders. Similar findings were observed in the literature. Additionally, a strong density gradient between the facing grooves is predicted and validated, demonstrating that the calibrated model achieved good agreements with the measurements. The proposed hybrid calibration procedure could be used for other shape and size die not benefiting from radial instrumentation. Moreover, the ALE approach demonstrated its robustness in solving die powder compaction in presence of strong mesh distortions.
Fichier principal
Vignette du fichier
Modelling-powder-compaction.pdf (3.05 Mo) Télécharger le fichier
Origine : Fichiers produits par l'(les) auteur(s)

Dates et versions

hal-03391568 , version 1 (15-11-2021)

Identifiants

Citer

G. Alonso Aruffo, Mohammed Michrafy, Driss Oulahna, Abderrahim Michrafy. Modelling powder compaction with consideration of a deep grooved punch. Powder Technology, 2022, 395, pp.681-694. ⟨10.1016/j.powtec.2021.10.012⟩. ⟨hal-03391568⟩
104 Consultations
80 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More