P. Jellema, M. W. Van-tulder, M. Van-poppel, A. L. Nachemson, and L. M. Bouter, Lumbar Supports for Prevention and Treatment of Low Back Pain, A Systematic Review Within the Framework of the Cochrane Back Review Group, Spine, vol.4, pp.377-386, 2001.

P. Calmels, P. Queneau, C. Hamonet, L. Pen, C. Maurel et al., Effectiveness of a Lumbar Belt in Subacute Low Back Pain: An Open, Multicentric, and Randomized Clinical Study, Spine, vol.3, pp.215-220, 2009.

W. Kaplan, V. J. Wirtz, A. Mantel-teeuwisse, P. Stolk, B. Duthey et al., Priority Medicines for Europe and the World 2013 Update. Priority Medicines for Europe and the World Update, report. Methodology, vol.2013, issue.2, 2013.

M. Beausejour, Y. Petit, G. Grimard, C. E. Aubin, J. Dansereau et al., Relationships between strap tension, interface pressures and spine correction in brace treatment of scoliosis, Stud Health Technol Inform, pp.207-211, 2002.

F. Munoz, J. F. Salmochi, P. Rougier, P. Calmels, P. Badel et al., New non-invasive and patient-specific method allowing intradiscal pressure change measurement induced by lumbar conservative or surgical treatments, Annals of Physical and Rehabilitation Medicine, vol.1, p.277, 2012.

M. Debeliso, T. Sevene, K. J. Adams, C. Harris, M. Climstein et al., The effects of a back-belt on lumbar disc deformation during stoop type lifting, International Journal of Science and Engineering Investigations, vol.16, pp.21613-21614, 2013.

A. Ambroziak and P. Klosowski, Mechanical testing of technical woven fabrics, Journal of Reinforced Plastics and Composites, vol.10, pp.726-739, 2013.

R. J. Bassett, R. Postle, and N. Pan, Experimental methods for measuring fabric mechanical properties: A review and analysis, Textile research journal, vol.11, pp.866-875, 1999.

Y. L. Lam, C. W. Kan, C. W. Yuen, and C. H. Au, Low stress mechanical properties of plasmatreated cotton fabric subjected to titanium dioxide coating, Textile Research Journal, vol.10, pp.1008-1013, 2011.

B. A. Mcgregor and R. Postle, Mechanical properties of cashmere single jersey knitted fabrics blended with high and low crimp superfine Merino wool, Textile research journal, vol.5, pp.399-411, 2008.

J. Yip and S. P. Ng, Study of three-dimensional spacer fabrics: Physical and mechanical properties, Journal of materials processing technology, vol.1, pp.359-364, 2008.

Y. Hou, L. Jiang, B. Sun, and B. Gu, Strain rate effects of tensile behaviors of 3-D orthogonal woven fabric: Experimental and finite element analyses, Textile Research Journal, vol.4, pp.337-354, 2013.

F. Chen, G. Wang, L. Li, and H. Cheng, Mechanical properties of a woven ramie fabric under multidimensional loadings, Textile Research Journal, vol.12, pp.1226-1233, 2011.

E. C-¸-inçik and E. Koç, The effect of blend ratio and process parameters on tensile properties of polyester/viscose blended needle-punched nonwovens, Fibers and Polymers, vol.6, pp.1040-1049, 2013.

H. Gabrijelcic, E. Cernosa, and K. Dimitrovski, Influence of weave and weft characteristics on tensile properties of fabrics. Fibres & Textiles in Eastern, Europe, vol.2, pp.45-51, 2008.

V. Sankaran and V. Subramaniam, Effect of Weave Structures on the Low Stress Mechanical Properties of Woven Cotton Fabrics. Fibres & Textiles in Eastern, Europe, vol.94, pp.56-59, 2012.

G. B. Hong and T. L. Su, Study on an optimal design of mechanical properties for PP/PET nonwovens. Fibres & Textiles in Eastern, Europe, vol.94, pp.75-79, 2012.

M. Montazer and A. Ramin, Influences of Proteases and Trans-glutaminases on Wool. Fibres & Textiles in Eastern, Europe, vol.79, pp.98-102, 2010.

P. Matkovi?, V. M. Skenderi, and Z. , Mechanical Properties of Polyurethane Coated Knitted Fabrics. Fibres & Textiles in Eastern, Europe, vol.100, pp.86-91, 2013.

M. S. Yeoman, D. Reddy, H. C. Bowles, D. Bezuidenhout, P. Zilla et al., A constitutive model for the warpweft coupled non-linear behavior of knitted biomedical textiles, Biomaterials, vol.32, pp.8484-8493, 2010.

R. Bonnaire, M. O. Lapointe, Y. Roumieu, J. Molimard, P. Calmels et al., Mechanical characterization of lumbar belts by measuring strain and interface pressure, Annals of Physical and Rehabilitation Medicine, vol.1, pp.121-122, 2014.

R. Bonnaire, W. S. Han, J. Molimard, P. Calmels, and R. Convert, Biomechanical analysis and modelling of lumbar belt: parametric study, Computer methods in biomechanics and biomedical engineering, vol.1, pp.62-63, 2014.

F. Chassagne, F. Martin, P. Badel, R. Convert, P. Giraux et al., Experimental investigation of pressure applied on the lower leg by elastic compression bandage, Annals of Biomedical Engineering, vol.43, p.26063162, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01251853

, Liste des produits et prestations remboursables, pp.516-531, 2017.

F. Chassagne, Biomechanical study of the action of compression bandages on the lower leg, PhD thesis, 2017.

S. Thomas, The use of the Laplace equation in the calculation of sub-bandage pressure, EWMA Journal, vol.1, pp.21-23, 2003.

L. Dubuis, A. S. Debayle, J. Badel, and P. , Patient-specific numerical model of soft tissues in the compressed leg: application to six subjects, Computer methods in biomechanics and biomedical engineering, vol.1, pp.44-45, 2012.

R. Bonnaire, W. S. Han, P. Calmels, R. Convert, and J. Molimard, Parametric study of lumbar belts in the case of low back pain: effect of patients' specific characteristics, CBM: MICCAI workshop on Computational Biomechanics for Medicine XIII, Granada (Spain), 2018.

K. C. Johnson and . Mechanics, , vol.452, 1985.

S. Derler and L. C. Gerhardt, Tribology of Skin: Review and Analysis of Experimental Results for the Friction Coefficient of Human Skin, Tribology Letters, vol.45, pp.1-27, 2012.

H. Riihimä-ki, Low-back pain, its origin and risk indicators, Scandinavian Journal of Work, vol.17, issue.2, pp.81-90, 1991.

J. Simon, M. Mcauliffe, F. Shamim, N. Vuong, and A. Tahaei, Discogenic low back pain, Phys Med Rehabil Clin N Am, vol.25, issue.2, pp.305-322, 2014.

Y. Toda, Impact of waist/hip ratio on the therapeutic efficacy of lumbosacral corsets for chronic muscular low back pain, Journal of Orthopaedic Science, vol.7, p.12486467, 2002.

R. Bonnaire, Caractérisation mé canique des orthèses: Application aux ceintures de soutien lombaire dans le cadre de la lombalgie, 2015.